P 6
Step 12
Parts needed - x4
Place a corner strip (No. 12) on all
4 corners of the building as
shown in the diagram and fix with
3x30mm screws per strip.
12x30mm screws
Step 11
Fix the panels onto the floor in
alignment with the floor bearers
underneath.
Position the panels so there is
equal spacing between the floor
and cladding on all 4 sides.
Fix using 3x50mm screws per
panel.
12x50mm screws
12
12
30mm
screw
Step 13
Parts needed - x2
Fix the fascia blocks (No. 14) to the
underside of the roof overhang as
shown in the diargam.
Screw down through the roof into
the block using 2x30mm screws per
block
4x30mm screws
14
12
14
Please retain product label and instructions for future reference
14
14
Pre drill
hole
Pre drill
hole
50mm
screw
30mm
screw
Pre drill
hole
12
