50mm
screw
Pre drill
hole
16x50mm screws
Remove transportation blocks
from the bottom of each panel
before beginning assembly.
Each Panel should have two
blocks.
Place
floor
on a firm and level
base, ensure base has suitable
drainage free from areas
where standing water can
collect. (See front page on
base requirements).
30mm
screw
Pre drill
hole
36x30mm screws
11
11
30mm
screw
Pre drill
hole
8x30mm screws
b
Position floor section a & b as in
diagram so that floors are flush to
each other, note that the floors do
not connect by a T&G joint.
Fix with 16x50mm screws alternate
the fixing positions along the
length of the floors.
Step 1 Floor Assembly
Pre Assembly
b
Join the flush hinges to the door
frames using 30mm screws. Ensure
hinges are attached using the
outer plate of the hinge.
Fit the doors to the door panel with
30mm screws making sure to use
the inner plate of the hinge.
Step 2 Door Fixings
1
31
13
The Mortice Lock is Reversible
Fit the mortice lock
into the recess and
fix in place with the
screws provided. Fit
the key plate to the
opposite door using
the screws provided.
30
33
Fix the door handles and the metal bar (spindle) using 8x30mm
screws. Ensure the mortice lock closes correctly. If not, remove
lock and turn the catch around using the small grub screw.
29
