P 5
Please retain product label and instructions for future reference
Step 8
Parts needed - No.19 QTY 1
No.31 QTY 2
Fix an L bracket
(No. 31)
flush to
each end of the roof support
(No.
19)
using 2x30mm screws for
each bracket. Position the roof
support
(No. 19)
in-between the
left gables and the window panel
opposite.
Line the roof support up so it sits
centrally at the panel join and fix
in place with 2x30mm screws.
Make sure the roof support sits
centrally to the window upright
shown in the illustration. Fix in
place with 2x30mm screws.
8x30mm Screws
Pre drill
hole
30mm
screw
19
31
31
Step 9
Parts needed - No.9 QTY 2
No.10 QTY 1
Layout the Roof Panels
(No.9 and No.10)
on a flat level surface and position them
as shown in the diagram. Secure the
panels together using 50mm screws and
alternate the positions.
12x50mm Screws
9
9
10
50mm
screw
Pre drill
hole
24
23
13
Step 10
Parts needed - No.13 QTY 2
No.23 QTY 1
No.24 QTY 1
Attach the front
(No.24)
roof framing
to the roof as shown in the illustration
using 3x30mm screws.
Attach the rear
(No.23)
roof framing
to the roof as shown in the illustration
using 5x30mm screws.
*Ensure to fix the framing the
opposite direction to the roof bearers.
Fix the Locating Blocks
(No.13)
to
the opposing sides to the roof
framing (these blocks are to help
square the roof when fitted).
12x40mm Screws
40mm
screw
Pre drill
hole
** If Shed add on pack has been purchased, do not fit No.23
the rear roof framing until instructed to do so in the Shed add
on Pack instructions**
Pre drill
hole
50mm
screw
Step 11
Parts needed - No.9 QTY 2
No.10 QTY 1
Place all Roof sections
(No.9 and
No.10)
on top of building, ensure
roof framing slots over each side
equally all the way around.
Fix Roof Panels into position using
50mm screws ensuring that they
line up with the vertical framing
inside the building and along the
length of the internal roof support
bar.
23x50mm Screws
9
9
10
Summary of Contents for 03DTSHCR0909FGD4TW-V1
Page 9: ...2 1 3 4...
Page 10: ...1 2...
