Please retain product label and instructions for future reference
P 9
Step 16
Parts needed - No. 6 QTY 1
No. 12 QTY 1
Place one of the 6Ft Roof Panels
(No. 6)
on the floor. Place the main
Roof Bearer A
(No. 12)
flat on the
bevelled end with the pointed
corner meeting the line drawn in
Step 13.
Fix Roof Bearer A
(No. 12)
to the 6Ft
Roof Panels
(No. 6)
by using a
60mm screw in the pre drilled hole
that was made in Step 12.
1x60mm Screws
Pre drill
hole
60mm
screw
Position Roof Bearer A
up against drawn line
and fix to 6Ft Roof
12
12
6
6
SIDE VIEW
VIEW FROM ABOVE
Step 17
Parts needed - No. 6 QTY 2
No. 7 QTY 1
No. 8 QTY 1
No. 12 QTY 1
No. 14 QTY 3
*The use of a step ladder is
essential to construct the roof.*
To construct the Roof,
place the previously assembled
(in Step 16) 6ft Roof Panel
(No. 6)
and Roof Bearer A
(No. 12)
on top
of the Summer House and let the
pointed edge on the other end of
the bearer meet the line drawn (in
Step 13) on the second 6ft Roof
Panel
(No. 6)
.
When in position, Use
1x60mm screw to fix up through
the previous drilled hole (in Step
12) of the bearer into the roof
frames. The beveled end of the
bearer must be flat against the
roof.
Once secure, place the third
set of roof panels
(No. 7 & 8)
previously assembled (in Step 10)
onto the building as shown.
You will secure it in the next
couple of steps.
1x60mm Screws
Pre drill
hole
60mm
screw
A
B
A
B
C
C
6
6
6
6
6
7
8
12
14
