Please retain product label and instructions for future reference
P 12
Step 25
Parts needed - No. 34 previously
cut in to pieces in step 11.
Position the four largest pieces
of felt that you have cut (if you have
not yet cut your felt please refer to
Step 11) at the bottom of each side
of the roof and fix with evenly
spaced felt tacks.
Make sure the felt
overhangs by 50mm. Trim as
required.
Take the 1300mm long strip
of felt cut in Step 11 and place it at
the top of the roof and fix using felt
tacks.
Make sure the felt overlaps by
50mm.
Using the four strips of felt cut
in Step 11 place them over each of
the ridges in the roof and fix using
felt tacks, avoid felt tack already on
the roof.
Secure all of the felt using felt tacks
with even spaces of 100mm
between each tack.
270x Felt tacks
C
B
A
A
B
C
34
1
2
3
4
Step 26
Parts needed - No. 18 QTY 4
No. 19 QTY 2
Secure the Fascias
(No. 18 & 19)
to the building using 3 screws
per piece.
The Fascias for the side of the
building should be secured last
and will need to be cut to
length.
*Ensure to screw through the
fascia into the eaves frame
behind avoiding any other
screws.
18x30mm Screws
Pre drill
hole
30mm
screw
19
19
18
18
18
18
*
trim to fit
Step 27
Parts needed - No. 17 QTY 1
No. 33 QTY 2
Before fitting the roof cap and the
Finials to the Summer House,
secure from underneath the two
Finials
(No. 33)
to either each end
of the Roof Cap
(No. 17)
by using
one 50mm screw per Finial.
2x50mm Screws
17
33
33
Pre drill
hole
50mm
screw
