Step 5
Fix the corners with 3x
50mm screws as shown in
diagram.
6x50mm screws
P4
Step 6
First position the Large Roof
support bar in the centre of the
building between the left and
right corner. Ensure the top face
of the support is level with the
top of the building and then
mark position below the
framing for the fittings.
Using the marked position, align
the roof support block and fix
using 2x100mm screws
diagonaly through the block. Do
this on both sides.
4x100mm screws
Roof support must be
level with top of framing
6
12
First position the Front Roof
support bar in the centre of the
building between the front of
the building and the large roof
support bar. Ensure the top face
of the support is level with the
top of the building and then fix
using L’brackets.
Position the Back Roof support
bar in the centre of the building
between the back and the large
roof support bar. Ensure the top
face of the support is level with
the top of the building and then
mark position below the
framing for the fittings.
Using the marked position, align
the roof support block and fix
using 2x100mm screws
diagonaly through the block.
At the front, secure the support
bar into position using L’
Brackets.
Step 7
4x30mm screws
20x30mm screws
2x100mm screws
Roof support must be
level with top of framing
6
15
14
16
Step 8
Layout the roof sheet and
position the roof framing onto
the sheet, as shown in diagram.
Ensure framing is level around
the edges and fix each piece
using 30mm screws
Rear roof framing
Rear roof framing
Side roof framing
Side roof framing
Front roof framing
17x30mm screws
10
10
8
7
P6
9
16
14
13
