Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P5
Step 5
Parts needed -
The Roof Support Bar (
No.10
) fits into
position between the gables and is
fixed into postion with 1x60mm
screw at each end as shown.
2x60mm screws
60mm
screw
10
10
Step 6
Parts needed - & & x2
Fix a Roof Eave (
No. 9
) to the Large
Roof Sheet (
No. 6)
and the Small Roof
Sheet (
No. 7
) using 4x30mm screws
per eave.
Position the roof sheets on the build-
ing and fix to the roof using 12x30mm
screws for the Large sheet and
10x30mm for the Small sheet.
30x30mm Screws
30mm
screw
7
6
9
7
6
9
Step 7
Once the roof is fitted, secure the building
to the Floor fixing the panels onto the
floor using 50mm screws in alignment
with the floor joists
.
18x50mm Screws
50mm
screw
Step 8
Cut felt into 3 sheets of 1605mm and lay
onto Roof as shown in diagram ensuring
there is a 50mm overhang around the
sides.
Fix using felt tacks at 100mm intervals.
80 Felt Tacks
Felt
tacks
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
1!
2!
Pre drill
hole
