Step 3
Parts needed -
Place the Floors
(No.1)
flush to each other ensuring the
framing is face up.
Fix the floors together by screwing through the bearers
using 8x50mm screws. Alternate fixing poisitons along
the length of the floors to avoid screws colliding.
Flip the floors to the correct way up on your firm and
level base, ensure base has suitable drainage free from
areas where standing water can collect. (See front page
on base requirements).
8x50mm screws.
1
1!
2!
Pre drill
hole
1
50mm
screw
1
Step 4
Parts needed - &
Place the Plain Panel (
No.3
) and the
Short Window Panel (
No.5
) on top of the
floor, ensuring the panels are positioned
centrally on the floor, as shown in the
illustration.
Fix together by screwing through the
framing of the Window Panel (
No.5
) into
the framing of the Plain Panel (
No.3
)
using 3x50mm screws.
Do not secure the building to the
Floor
until the Roof is fitted.
3x50mm screws.
3
5
50mm
screw
1!
2!
Pre drill
hole
3
5
Step 5
Parts needed -
Position the Tall Window Panel (
No. 4
)
centrally on top of the floor, as shown
in the illustration.
Fix by screwing through the framing
of the Tall Window Panel (
No.4
) into
the framing of the Plain Panel (
No.3
)
using 3x50mm screws per corner.
Do not secure the building to the
Floor until the Roof is fitted.
3x50mm screws
4
50mm
screw
4
1!
2!
Pre drill
hole
3
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
www.merciagardenproducts.co.uk P7
