Step 5
Parts needed - &
Position the Door Panel (
No. 2
) and second
Window Panel (
No. 4
) centrally on top of the
floor, as shown in the illustration.
Fix together by screwing through the framing
of the Door Panel (
No. 2
) and Back Panel (
No.
3
) into the framing of the Window Panels (
No.
4
) using 3x50mm screws per corner.
Do not secure the building to the Floor
until the Roof is fitted.
*Note: the window panels will sit higher than
the back and door panels.
9x50mm screws
50mm
screw
2
4
1!
2!
Pre drill
hole
4
2
Step 6
Parts needed - &
Locate the Plain Gable Top
(No. 5)
on top of
the Back Panel
(No. 3),
and the Window
Gable Top
(No. 6)
on top of the Door Panel
(No. 2),
ensuring to interlock the bottom
board of the gable with the top board of
the panel, as shown in the diagram.
Secure the Gables
(No. 5 & 6)
to the panels
below by screwing through the framing
using 6x50mm screws, as shown in the
illustrations.
Ensure to stagger screws to avoid collision.
Do not secure the building to the Floor
until the Roof is fitted.
12x50mm screws
50mm
screw
5
6
5
6
6
5
Gable Top
Panel
www.merciagardenproducts.co.uk P7
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
