Step 12
Parts needed -
Locate the Bunk Floor Block B
(No. 15)
between the framing of the back panel
at a height of 28mm
from the top of the
Support Bar
(No. 13)
to the underside of
Floor Block B
(No. 15)
as shown in the
illustration.
Fix in place by screwing through the
framing of the back panel into each end
of the block using 2x40mm screws.
2x40mm screws
40mm
screw
1!
2!
Pre drill
hole
15
15
28mm
13
40mm
screw
Step 13
Parts needed - &
Locate two Bunk Floor Block E’s
(No. 18)
flush to the panel framing. Ensure the
top of block E is
28mm
from the top of
the support bar
(No. 13)
. The longest
side of the block should be against the
panel framing.
Fix to the Back Panel using 1x40mm
screw per block, screwing through the
block into the framing.
Locate Bunk Floor Block B
(No. 15)
on
top of Block E as shown in the diagram.
Fix with 1x40mm screw per end down
through block B
(No. 15)
into block E
(No. 18).
4x40mm screws
18
15
1!
2!
Pre drill
hole
15
28mm
18
18
13
Step 14
Parts needed - & &
Away from the building, locate two Bunk
floor block A’s
(No. 14)
to either end of the
Bunk Floor
(No. 7)
, ensuring the ends and
tops are flush, as shown in the illustration.
Locate the remaining Bunk Block C
(No.
16)
centrally between the two Block A’s,
ensuring a
29mm gap either side.
Fix the blocks
(No. 14 & 16)
by screwing
through the blocks into the floor’s framing
using 2x50mm screws per block.
6x50mm screws
1!
2!
Pre drill
hole
7
14
14
50mm
screw
16
16
7
14
29mm gap
1!
2!
Pre drill
hole
25
Step 15
Parts needed - & &
To assemble the ladder, slot each
Ladder Step (
No. 26
) into the
grooves of the Left (
No. 24
) and
Right (
No. 25
) Ladder Sides.
Fix with 4x50mm screws per step as
shown.
12x50mm screws.
50mm
screw
24
25
26
24
26
www.merciagardenproducts.co.uk P10
Please retain product label and instructions for future reference
DO NOT ALLOW YOUR CHILD TO PLAY WITH ANY
COMPONENT PARTS PRIOR TO ASSEMBLY.
