P 11
Step 5
i)Position a truss frame to the
ridge bar sloping down towards
the building side, ensure it is
central to the middle upright of
the panel. Fix with a 50mm screw
through the ridge bar into the
truss frame.
ii) Align the second truss frame
with the first on the opposite side
of the ridge bar and fix with a
50mm screw at an angle as
illustrated.
ENSURE SUPPORT BARS
ARE MANUALLY SUP-
PORTED UNTIL FIXED AT
BOTH ENDS
i
ii
4x50mm Screws
Pre drill
hole
50mm
screw
9
9
Step 6
i) Fix the truss block to the side
panel framing with 2 x 50mm
screws. Position the block at the
top of the framing with the
angle pointing upwards into the
building, aligning the block
centrally along the join between
the side panels with one screw
in each panel.
ii) Fix the support bar to the
block using 1 x 50mm screw.
ii
i
11
6x50mm Screws
Pre drill
hole
50mm
screw
11
11
Step 7
Fix a Truss support
between the two truss
frames and fix in place
using 40mm screws,
ensure you pre-drill
holes before fixing
together.
4x40mm Screws
40mm
screw
Pre drill
hole
12
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Step 8
Place two roof sheets
ontop of the plain gable
and truss.
Before fixing the roof
sheet to the truss frame
make sure the edge of
the roof sheet sits in the
middle of the truss frame
then fix using 40mm
screws.
32x40mm Screws
8x30mm Screws
Fix the eaves frame to the
roof sheet using 3x30mm
screws for each sheet.
b
b
40mm
screw
Pre drill
hole
6
18
