P 5
Step 8
Once the roof is fixed,
secure the building to the
floor with 24x50mm screws.
* Ensure to screw in alignment
with the floor bearers.
30x50mm Screws
Pre drill
hole
50mm
screw
Step 6
Fix the
roof
panels on either
side as shown in diagram.
Ensure roof framing fits into slot
at top between the gable top
rafters and the
roof truss
.
Fix panels into position using
30x 30mm screws from the top
of panel, straight into the rafter
and roof truss. Pre drill holes
before hand.
Ensure the larger over hang on
both panels are facing each
other at the top point.
40x 30mm Screws
5
1
4
4
4
4
12
*Secure the truss support 51mm from the top edge.
14
Fix the last two truss supports
to the assembly with 2x40mm
screws per side.
4x40mm Screws
11
11
Attach the truss blocks to each side
of the support with 1x60mm
screw per block.
2x50mm Screws
Pre drill
hole
50mm
screw
12
11
*
Secure the first 2 truss
supports together with
4x40mm screws as shown
in the illustration.
4x40mm Screws
40mm
screw
Step 5
Pre drill
hole
50mm
screw
Fix the assembled truss inbetween
the panels, approximately half
way between the gables, and secure
using 4x50mm screws.
4x50mm screws
Step 7
Please retain product label and instructions for future reference
