Remove transportation blocks
from the bottom of each panel
before beginning assembly.
Each Panel should have two
blocks.
Step 1
Place
floor
on a firm and level
base, ensure base has suitable
drainage free from areas
where standing water can
collect. (See front page on
base requirements).
Step 2
1
Do not secure the building
to the floor until the roof is
fitted. Fix the panels onto
the floor using 50mm
screws in alignment with
the floor joists.
Fix the corner with 3x
50mm screw a shown in
diagram.
Step 3
11 x 50mm screws
50mm
screw
2
3
Step 4
Fix door gable and remaining
plain side using the same method
shown in step 4.
9 x 50mm screws
50mm
screw
3
4
