Mercia Garden Products 01DTSHRAX1006SDFW-V1, General Instructions Manual

Page: 7 / 13

P 7
Please retain product label and instructions for future reference
30mm
screw Pre drill
hole
Step 12
Parts needed - No. 18 QTY 2
Position a Roof Support Bar (No. 18),
centrally underneath the join of the two
roof panels
(No. 9)
internally. Ensure the
Roof Support Bar (No. 18) sits flush to the
underside of the roof panels and flush at
the top as shown in the illustration.
Fix the Roof Support Bar
(No. 18)
in place
using 30mm screws fixing through the
roof panel
(No. 9)
into the Roof Support
Bars (No. 18) from the outside of the
building.
*Alternate screwing through each roof
panel for a more secure hold.
10x30mm Screws
18
18
18
18
Step 13
Parts needed - No. 19 QTY 2
No. 20 QTY 2
Place Roof Block B
(No. 20)
under the top
framing of the panel directly below the
Roof Support Bar (No. 18). Fix the block
by screwing through the outside of the
panel with 2x30mm screws.
Then place Roof Block A
(No. 19)
ontop of
the Roof Block B (No. 20), angled cut
edge facing upwards, flush to the Roof
Support Bar (No. 18). Fix in place with
2x50mm screws.
Repeat the above two actions on either
side of the building.
4x30mm Screws
4x50mm Screws
30mm
screw Pre drill
hole
50mm
screw
19
19
19
20