P 7
Please retain product label and instructions for future reference
Step 12
Parts needed - No. 19 QTY 2
Place Truss Block
(No. 19)
up to the Roof Truss
(No.18)
so the angled cut edge is facing
upwards, flush to the Roof Truss
(No. 18).
Fix
in place with 2x50mm screws through the
block into the panel framing.
Repeat on the opposite side of the building.
4x50mm Screws
30mm
screw
Pre drill
hole
19
20
Step 13
Parts needed - No. 20 QTY 1
Place the Truss Brace
(No.20)
underneath the two Roof Support
Bars
(No.18)
ensuring they sit flush
to one another. The Truss Brace
(No.20)
should sit horizontal -
parallel to the floor.
Once in position fix the Truss Brace
(No.20)
in place with 2x40mm
screws at each end of the brace.
4x40mm Screws
40mm
screw
Pre drill
hole
9
9
Pre drill
hole
40mm
screw
Step 14
Use 40mm screws to fix The Roofs
(No. 9)
down
the sides and at the bottom being sure that the
screws attach into the framing below.
20x40mm Screws
9
9
50mm
screw
Pre drill
hole
Step 15
Once the roof is fixed, attach the building to the
floor with 50mm screws.
Ensure the screws go through the panel into
the floor framing
21x50mm Screws
