P 6
Please retain product label and instructions for future reference
Step 10
Parts needed- No. 12 QTY 4
Fit the cover trims to the front and
back of the building
(No. 12)
as
shown in the illustration using
30mm screws.
Trim the length of the cover trims
(No. 12)
to the required size before
fitting if necessary.
12x30mm Screws
12
30mm
screw
Pre drill
hole
12
12
12
IMPORTANT:
Pre-drill before fixing screws.
IMPORTANT:
Pre-drill before fixing screws.
IMPORTANT:
Pre-drill before fixing screws.
Step 11
Parts needed - No. 13 QTY 4
- No. 21 QTY 2
Fit the fascias
(No. 13)
to the roof
ensuring the fascias
(No. 13)
finish
flush with the felt using 40mm
screws
Fit the finial
(No. 21)
to the fascias
(No. 13)
using 40mm screws
16x40mm Screws
40mm
screw
Pre drill
hole
21
21
13
13
13
13
Fix 2x window strips
(No.10)
to the framing
along the outside edge of the window gap
using 2x30mm screws per strip.
Place the plastic cill
(No.20)
into the
window panel as shown in the illustration.
Fix the cill using 3x30mm screws through
to the framing
Fit the styrene sheets
(No.16)
on top of the
window cill.
*For added weather protection fit your
windows using silicone sealant around
the outside edges.
**When positioning the styrene sheets
ensure
there is an equal distance on all sides.
10
10
20
SILICONE
SEALANT
16
16
10
10
10
Pre drill
hole
30mm
screw
a
b
c
d
Side View
Styrene
Window Cill
Cladding
Step 12
Parts needed - No.10 QTY 5
- No. 16 QTY 2
- No. 20 QTY 1
Attach the three remaining window strips
(No. 10)
at either side of the styrene
(No. 16)
using 2 x 30mm tamper proof screws per
strip. Make sure the screws enter the framing
in the window side and not the styrene.
13x30mm Tamper Proof Screws.
Summary of Contents for 01DTSHAX0806SDSEC-V1
Page 8: ...2 1 3 4...
Page 9: ...1 2...
