P 5
Please retain product label and instructions for future reference
8
13
13
Step 8
Attach the 2x eaves frames (
No. 13
)
to each roof (
No. 8
) using 3x30mm
screws per eaves frame.
*Ensure the eaves are flush to the
edges of the roof sheet.
*
For T&G roof options use the same
method as stated above ensuring the
eaves framing is flush with the edge
of the roof framing and screwed directly
through the eaves framing into the
roof framing and not into the T&G
boards.
12x40mm Screws
Pre drill
hole
30mm
screw
13
13
8
* OSB OPTION
* T&G OPTION
Step 9
Place the assembled roof panels
on to the building and secure as
shown in the illustration with
18x30mm screws
* Ensure the roofs are flush with
the sides of the building.
18x30mm Screws
Pre drill
hole
30mm
screw
*If you have purchased the T&G roof and floor option ensure to fix
the roof to the building using 38x70mm screws following the same
method outlined above.
Internally
: Secure the roof panels together where they join using
5x50mm screws.
18x70mm Screws
5x50mm Screws
Pre drill
hole
70mm
screw
50mm
screw
b
b
b
b
b
b
b
Step 10
Secure the building to the
floor using 18x50mm screws.
*Ensure to screw through the framing
into the floor bearers.
18x50mm Screws
Pre drill
hole
50mm
screw
b
b
b
b
Step 11
Cut the felt into 3 sheets and lay
onto the roof.
* Ensure there is approximately
50mm of overhang around the
building.
Fix into place using 219x felt tacks
at 100mm intervals.
219xFelt Tacks
Felt
tacks
Felt size: 10x8 - 3220mm
12x8 - 3760mm
1.
2.
3.
HANDLE
WITH CARE
1
2
3
4