Moving the co-driver bench seat surface forwards
and backwards
#
To fold the seat surface forward: lift seat sur-
face out of front anchorage
1
.
#
Pull the seat surface out of rear anchorage
2
and move it slightly forwards.
#
Fold the rear edge of the seat surface
upwards.
%
You can stow individual objects in the stowage
compartment beneath the co-driver bench
seat.
#
To fold away the seat surface: fold the rear
edge of the seat surface downwards.
#
Slide the seat surface under the seat backrest
into rear anchorage
2
.
#
Push the front seat surface downwards until it
engages in the front anchorage
1
.
Folding the folding seat up or down
&
WARNING Risk of injury when using the
folding seat due to inserted key
The key in the lock of the partition wall sliding
door may come into contact with the person
on the folding seat.
#
Always remove the key before a person
sits on the folding seat.
#
Remove key
1
from the partition sliding door.
#
Press the push button on catch
2
and fold
seat cushion
3
up or down.
#
Release push button on catch
2
when seat
cushion
3
reaches its end position.
#
Move seat cushion
3
until it has locked. The
push button on catch
2
must be completely
flush with the seat frame.
Installing and removing the rear bench seat
&
WARNING Risk of injury due to incorrect
installation of the rear bench seat
If the rear seat is unsuitable, the seat belts
may not perform their intended protective
function.
#
Install the rear seat bench as described
and only in the direction of travel.
#
Installation of the rear bench seat in a
face-to-face position is not permitted.
#
Use only rear bench seats that have been
approved by Mercedes-Benz for your
vehicle.
&
WARNING Risk of injury if the rear bench
seat is not locked in place
If the rear bench seat is not stable, it may tip
over during a journey.
#
Before setting off, ensure that the rear
bench seat is engaged. The red indicator
tabs must not be visible on the release
handle.
Seats and stowage
73
