The fuses are located in various fuse boxes:
R
Fuse box in the co-driver's footwell
(
/
page 239)
R
Fuse box in the seat base of the driver's seat
(
/
page 239)
Opening the fuse box in the seat base of the driv-
er's seat
#
To open: press down and unclip fasteners
1
on the cover.
#
Remove the cover.
#
To close: press the cover firmly into the seat
base until fasteners
1
clip in.
Opening and closing the fuse box in the co-driver's
footwell
Opening the fuse box
#
Unlocking and removing the stowage compart-
ment cover in the co-driver's footwell
(
/
page 240).
Example: vehicle tool kit insert
#
Lift the insert at marked positions
1
.
#
Pull the insert out of clips
2
.
Closing the fuse box
#
Slide the insert into clips
2
.
#
Close the insert by pressing on marked posi-
tions
1
.
#
Put on the stowage compartment cover in the
co-driver's footwell and lock it (
/
page 240).
Information on the vehicle tool kit
The vehicle tool kit is located in the stowage com-
partment in the footwell on the front passenger
side (
/
page 240).
The vehicle tool kit contains:
R
a towing eye
R
a screwdriver with Torx
®
, Phillips and slotted
heads
The vehicle tool kit may also contain the following,
for example:
R
an open-end wrench
R
a wheel wrench
R
a release tool for the park pawl
R
an insert bit
R
a socket wrench
R
a tool for unlocking the lockable DEF filler cap
Breakdown assistance 239
