Mercedes-Benz Sprinter Operating Instructions Manual Download

Page: 242 / 354

Unlocking and removing the storage compartment
cover

Remove the rubber mat from the co-driver's

footwell.

To unlock: turn quick-release fastener

counter-clockwise to position

Slightly raise and pull out the cover.

Inserting and locking the cover

Slide in the cover and press it downwards.

Press down quick-release fastener

until it

engages.

To lock: turn quick-release fastener

clock-

wise to position

Removing the vehicle tool kit

Example: vehicle tool kit insert

Raise the insert at marked points

Pull the insert out of clips

Storing the vehicle tool kit

Slide the insert into clips

Close the insert by pressing on marked points

Hydraulic jack

Information on the hydraulic jack

The hydraulic jack is located in side compartment

above the co-driver door step.

Vehicles with more than 18 seats

Hydraulic jack

is located behind the last bench

seat on the right.
The jack has a maximum weight of 16.5 lbs

(7.5 kg) depending on the vehicle's equipment.

You will find the maximum load capacity of the jack

stated on the adhesive label attached to the jack.

If there is a malfunction, please contact a qualified

specialist workshop.

240 Breakdown assistance

Summary of Contents for Sprinter



































































































































































































































































































































































Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands

Mercedes-Benz Sprinter, Operating Instructions Manual

Search results

Summary of Contents for Sprinter

Reviews:

Related manuals for Sprinter

Brands by name

Popular brands