Mercedes-Benz SLS AMG GT Coupe, Operator'S Manual

Page: 100 / 290

X
To switch on the standing lamps: the
SmartKey is not in the ignition lock or it is
in position 0.
X
Turn the light switch to W (left-hand side
of the vehicle) or X (right-hand side of
the vehicle).
Combination switch
Turn signal
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
X
To indicate briefly: press the combination
switch briefly to the pressure point in the
direction of arrow ; or ? .
The corresponding turn signal flashes three
times.
X
To indicate: press the combination switch
beyond the pressure point in the direction
of arrow ; or ? .
High-beam headlamps
X
To switch on the high-beam headlamps:
turn the SmartKey in the ignition lock to
position 2 or start the engine.
X
Turn the light switch to L or à .
X
Press the combination switch beyond the
pressure point in the direction of
arrow : .
In the à position, the high-beam
headlamps are only switched on when it is
dark and the engine is running.
The
K indicator lamp in the instrument
cluster lights up when the high-beam
headlamps are switched on.
X
To switch off the high-beam
headlamps: move the combination switch
back to its normal position.
The K indicator lamp in the instrument
cluster goes out.
High-beam flasher
X
To switch on: turn the SmartKey in the
ignition lock to position 1 or 2, or start the
engine.
X
Pull the combination switch briefly in the
direction of arrow = .
Hazard warning lamps
The hazard warning lamps automatically
switch on if:
R
an air bag is deployed or
R
the vehicle decelerates rapidly from a
speed of more than 45 mph (70 km/h) and
comes to a standstill.
X
To switch on the hazard warning lamps:
press button : .
All turn signals flash. If you now switch on
a turn signal using the combination switch,
98
Exterior lighting
Li
ghts
and
wind
sh
ield
wip
er
s