Mercedes-Benz ML 320 BlueTEC, Operator'S Manual

Page: 324 / 424

Vehicle status messages in the multifunction display
322
Display messages Possible cause/consequence Possible solution
I
Key Not Detected
The SmartKey with KEYLESS-GO is not
detected while the engine is running
because the SmartKey is not in the
vehicle.
X
Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Search for the SmartKey.
The vehicle cannot be locked centrally nor can
the engine be started again after the engine is
stopped.
I
Key Not Detected
The SmartKey with KEYLESS-GO is not
detected while the engine is running
because there is strong radio-frequency
interference. X Stop the vehicle as soon as it is safe to do so.
X
Engage the parking brake.
X
Operate the vehicle with the SmartKey in the
starter switch.
I
Key Not Detected The SmartKey with KEYLESS-GO is
momentarily not detected.
X
Change the position of the SmartKey in the
vehicle.
X
Operate the vehicle with the SmartKey in the
starter switch if necessary.
I
Pull starting
button out then
insert key.
The SmartKey with KEYLESS-GO is
permanently not detected. X Operate the vehicle with the SmartKey in the
starter switch.
X
Contact an authorized Mercedes-Benz Center.
t
Bluetooth Ready
The telephone has not yet been
connected to the COMAND system via
Bluetooth
®
.
X
Connect the telephone to the COMAND system
via Bluetooth
®
.
Practical hints