Mercedes-Benz ML 320 BlueTEC, Operator'S Manual

Page: 161 / 424

Control system
159
using the button on the door control panel
(
Y
page 107).
Make sure both exterior rear view mirrors are
folded out completely before driving off.
X
Move the selection marker with button
æ
or
ç
to the
Comfort
submenu.
X
Press button
j
or
k
repeatedly until
the message
Fold In Mirrors When
Locking
appears in the multifunction
display.
The selection marker is on the current
setting.
X Press button
æ
or
ç
to switch
function
On
or
Off
.
Vehicle configuration menu
Use the Vehicle configuration menu to set
the DSR speed (
Y
page 159).
DSR (Downhill Speed Regulation)
programmed default speed
Use this function to program the default
speed the DSR is set to when it is activated.
You can program the default speed between
4 - 10 mph (Canada: 6 - 18 km/h). The set
value is increased in 1 mph (Canada:
2 km/h) increments.
X
Press button
è
or
·
repeatedly until
the
Vehicle configuration menu appears
in the multifunction display.
X
Press button
j
or
k
repeatedly until
the message
DSR Speed
appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button
æ
or
ç
repeatedly until
the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use the
programmed default speed to regulate the
vehicle’s speed.
Once DSR is switched on, you can adjust the
set speed using the cruise control lever
(
Y
page 168).
Trip computer menu
Use the Trip computer menu to call up
statistical data on your vehicle.
The following information is available:
R
Fuel consumption statistics since start
(
Y
page 160)
R
Fuel consumption statistics since last reset
(
Y
page 160)
R
Resetting fuel consumption statistics
(
Y
page 160)
R
Distance to empty (
Y
page 160)
When you enter the Trip computer menu,
you will always see the fuel consumption
statistics since start first.
Controls in detail
Z