Mercedes-Benz Media Interface Plus, Operating Instructions Manual

Page: 49 / 273

47
DUO plus child seat
Checklist for correct installation
For the safety of your child, check that:
• the child seat is firmly installed in the
vehicle.
• the belt is belt
taut
and
not
twisted.
• the tongue and the buckle of the vehicle
seat belt are
not
positioned in the belt
guides of the child seat.
• the diagonal belt is
only
clamped by the
lock-off which is located on the oppo-
site side from the vehicle seat belt
buckle.
Removing
1. To remove the child seat open the
buckle of the vehicle seat belt and
take the diagonal belt with a short pull
out of the belt lock-off
9
.
2. This countermovement releases the
interior clamping of the belt lock-off
9
and the clamping lever
8
is now easy
to open.
Securing your child
Adjusting the shoulder belts
Before you install the child seat in the vehi-
cle, please ensure that the shoulder belts
are adjusted to the correct height. Place
the child into the child seat.
• The shoulder belts
10
must run at
shoulder height
or a
little above
.
• The shoulder belts
10
must
not
run
be-
hind the back
of the child or
at ear
height
or above.
MBA_BA.book Seite 47 Donnerstag, 18. Juni 2015 7:44 07