Fitting/removing the cover on the
front wheel arch
You must remove the cover from the front wheel
housing before you can change the front bulbs.
X
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Remove securing pin
;
using a suitable tool.
X
Slide cover
:
up and remove it.
X
To fit: insert cover
:
again and slide it down
until it engages.
X
Insert securing pin
;
.
Dipped-beam headlamps
X
Remove the cover in the front wheel arch
(
Y
page 129).
X
Turn housing cover
:
anti-clockwise and
remove it.
X
Turn bulb holder
;
anti-clockwise and pull
out.
X
Pull the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Insert bulb holder
;
and turn it clockwise.
X
Press on housing cover
:
and turn it to the
right.
X
Replace the cover in the front wheel arch
(
Y
page 129).
Main-beam headlamps
X
Switch off the lights.
X
Open the bonnet.
X
Turn housing cover
:
anti-clockwise and
remove it.
X
Pull lever
=
upwards (headlamp on the left-
hand side when viewed in the direction of
travel) or downwards (headlamp on the right-
hand side when viewed in the direction of
travel) and remove bulb holder
;
.
X
Pull the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Simultaneously press bulb holder
;
and pull
lever
=
downwards (headlamp on the left-
hand side when viewed in the direction of
travel) or upwards (headlamp on the right-
hand side when viewed in the direction of
travel).
X
Press on housing cover
:
and turn it to the
right.
Replacing bulbs (vehicles with halogen headlamps)
129
Light
s
and
winds
creen
wiper
s
Z