X
Confirm by pressing
a
on the steering
wheel.
X
Press
:
or
9
to select the
Instru‐
ment Cluster
submenu.
X
Press
a
to confirm.
X
Press
:
or
9
to select the
Permanent
Display
function.
X
Press
a
to confirm.
The current setting
Outside Temperature
or
Speedometer [km/h]
appears.
X
To change the setting: press
a
again.
Display messages
Hybrid drive system
Display messages
Possible causes/consequences and
M
Solutions
d
Vehicle Operational
Switch the Ignition
Off Before Exiting
You are exiting the vehicle when it is in a ready-to-drive state. The
õ
indicator in the multifunction display is on. A warning tone also
sounds.
If you leave the vehicle:
X
Secure the vehicle against rolling away (see the vehicle Operator's
Manual).
X
Switch off the ignition and remove the SmartKey.
If you do not leave the vehicle:
X
Switch off the electrical consumers, e.g. automatic climate control,
seat heating.
Please note the following: the electrical consumers are supplied by the
12 V battery. If the vehicle is left in a ready-to-drive state for an exten-
ded period, it will switch off once the 12 V battery is almost empty. It
will then only be possible to start the vehicle using a second battery
(jump-starting).
Change the current
drive program
before changing the
operating mode.
or
Exit manual drive
program M before
changing the operat‐
ing mode.
You have attempted to change the operating mode in the automatic
drive program S (Sport), S+ (Sport Plus) or in the manual drive pro-
gram M.
X
Activate drive program C (Comfort) or E (Economy) (
Y
page 23).
X
Select the preferred operating mode HYBRID, E-MODE, E-SAVE or
CHARGE (
Y
page 22).
E-MODE Currently
Unavailable
The condition of charge of the high-voltage battery has dropped to the
lower limit and the E-MODE operating mode has been switched off.
Driving with the internal combustion engine is activated and the oper-
ating mode switches to the basic HYBRID setting.
X
Continue driving using the internal combustion engine.
You can switch to the E-SAVE or CHARGE operating mode as
required (
Y
page 22).
If you select CHARGE, the high-voltage battery is charged.
Once the condition of charge display for the high-voltage battery
has increased slightly, you can switch to the E-MODE operating
mode again.
Display messages
45
On-board
com
puter
and
dis
pla
ys
Z
