Mercedes-Benz G 550 2021, Operator'S Manual

Page: 383 / 502

Assembling the jack
#
Assemble pump lever 1 .
#
Place pump lever 1 with the recess on low‐
ering screw 2 on the jack.
#
Turn pump lever 1 clockwise as far as it will
go.
Lowering screw 2 is closed.
3 Adapter
To raise the vehicle at the front: adapter 3
must be secured on the jack.
To raise the vehicle at the rear: remove
adapter 3 from the jack.
Important notes on using the jack:
R
Use only the vehicle-specific jack that has
been tested and approved by Mercedes-Benz
to raise the vehicle.
R
The jack is only designed for raising and
holding the vehicle for a short time while a
wheel is being changed and not for mainte‐
nance work under the vehicle.
R
The jack must be placed on a firm, flat and
non-slip surface. If necessary, use a large,
flat, load-bearing, non-slip underlay.
R
Position the jack only at the jack support
point.
Rules of conduct when the vehicle is raised:
R
Never place your hands or feet under the
vehicle.
R
Never lie under the vehicle.
R
Do not start the engine and do not release
the electric parking brake.
R
Do not open or close any doors or the rear-
end door.
Wheels and tires 381