Mercedes-Benz EQV 2021, Owner'S Manual

Page: 60 / 300

#
Briefly pull back rocker switch 3 .
If the door is locked, locking pin 4 pops up.
The sliding door unlocks, automatic operation
is started and the sliding door opens.
If you use sliding door button
1 or 2 in the
centre console you will hear two warning sig-
nals during the opening procedure.
The indicator lamp in sliding door button
1 or
2
in the centre console flashes for the dura-
tion of automatic operation.
The indicator lamp in sliding door button
1 or
2 in the centre console is lit whenever the
appropriate sliding door is open. Depending on
the vehicle equipment, the display can also
show the Sliding door open message.
Closing
#
Briefly press appropriate sliding door button
1 or 2 in the centre console.
or
#
Press sliding door button 5 in the door sill.
or
#
Briefly push rocker switch 3 forwards.
The sliding door is released from its lock and
automatic operation is started. The sliding door
closes.
If you use sliding door button
1 or 2 in the
centre console you will hear two warning sig-
nals during the closing procedure.
The indicator lamp in sliding door button
1 or
2
in the centre console goes out whenever
the corresponding sliding door is closed.
Interrupting automatic operation
#
Press corresponding sliding door button 1 or
2 in the centre console again.
or
#
Press sliding door button 5 in the door sill
again.
or
#
Briefly pull back rocker switch 3 .
Opening/closing the electric sliding door with the
key
%
If the vehicle is fitted with two sliding doors,
the
5
button on the key can only be used
to open or close one of the two sliding doors
( / page 58).
#
To unlock: briefly press the
5
button on the
key.
#
To open: press and hold the
5
button on
the key for longer than 0.5 seconds.
You will hear two acoustic signals and the slid-
ing door will open automatically.
#
To close: press and hold the
5
button on
the key for longer than 0.5 seconds.
You will hear two acoustic signals and the slid-
ing door will close automatically.
#
To interrupt automatic operation: briefly press
the
5
button on the key.
The sliding door stops moving.
Opening/closing the electrical sliding door from
the outside
#
To open: pull door handle
1
.
The sliding door opens. In addition, you will
hear two warning signals.
#
To close: pull door handle 1 .
The sliding door closes.
#
To interrupt automatic operation: pull door
handle 1 again.
Programming the key button for the sliding door
Requirements:
R
The vehicle is equipped with two electric slid-
ing doors.
R
The sliding door to be programmed is open.
R
The vehicle is switched on.
The
5
button on the key can be programmed.
Program the
5
button to open the right or left
sliding door.
58
Opening and closing
T447 0414 02