Mercedes-Benz EQA 2022, Owner'S Manual

Page: 192 / 541

%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.
Configuring DYNAMIC SELECT (multimedia sys-
tem)
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select
Individual configuration
.
#
Select and set a category.
Switching the reset display on or off
#
Activate or deactivate Ask when starting .
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored. If the ECO
start/stop function was deactivated, an additional
prompt appears asking if the function should
remain deactivated.
%
The prompt appears only if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the A drive program is set automatically. The
ECO start/stop function is activated automati-
cally.
%
This function must be activated for each user
profile separately. Only when this function is
activated will the drive program and ECO
start/stop setting for the previous journey be
saved for the respective user profile.
Displaying vehicle data
Multimedia system:
4
©
5
Info
#
Select Vehicle .
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
©
5
Info
#
Select
Engine
.
The engine data is displayed.
%
The actual (maximum) values that can be ach-
ieved for engine output and engine torque
may deviate from the certified values within
the country-specific guidelines for permissible
tolerances (basis: UN-ECE No. 85 or country-
specific guidelines).
Influencing variables that can influence this
are, for example:
R
Sea level
R
Fuel quality
R
Outside temperature
R
Operating temperature of the engine
%
The values displayed serve only as orienta-
tion. The values for engine output and engine
torque shown on the media display may devi-
ate from the actual values.
Driving and parking 189