Mercedes-Benz COMAND MY07 Operator'S Manual Download Page 89

Page: 89 / 187

Telephone*

Important notes

The telephone cannot, or not yet, be used
in the following situations:

The telephone is already unlocked, but
it is not yet registered with the net-
work.

The message

NO SERV.

appears in the

status bar. The telephone automatical-
ly attempts to register with a network.
If there is no network available, “911”
emergency calls can NOT be placed.
If you try to place an outgoing call, the
message

Call not possible

is displayed

temporarily.

If the message

Telephone being

activated, please wait

is displayed,

If the message

Please insert phone

displayed.

Insert the cell phone into the tele-
phone cradle*.

Summary of Contents for COMAND MY07




























































































































































































Search results

Summary of Contents for COMAND MY07

Reviews:

Related manuals for COMAND MY07

Brands by name

Popular brands

Mercedes-Benz COMAND MY07, Operator'S Manual

Search results

Summary of Contents for COMAND MY07

Reviews:

Related manuals for COMAND MY07

Brands by name

Popular brands