Mercedes-Benz CLS 2011, Owner'S Manual

Page: 149 / 389

P
Park position with parking lock
R
Reverse gear
N
Neutral
D Drive
i
The DIRECT SELECT lever always returns
to its original position. The current trans-
mission position P, R, N or D appears in the
transmission position display
(
Y
page 146) in the multifunction display.
Transmission position and drive pro-
gram display
The current transmission position and drive
program appear in the multifunction display.
:
Transmission position display
;
Drive program display
i
The arrows in the transmission position
display show how and into which transmis-
sion positions you can change using the
DIRECT SELECT lever.
!
If the transmission position display in the
multifunction display is not working, you
should pull away carefully to check whether
the desired transmission position is
engaged. Ideally, you should select trans-
mission position D and drive program E or
S. Do not restrict the shift range.
Engaging park position P
X
Push the DIRECT SELECT lever in the direc-
tion of arrow P.
i
The automatic transmission shifts auto-
matically into park position P if you open
the driver's door when the vehicle is sta-
tionary or driving at very low speed, and the
transmission is in position D or R.
i
If you depress the brake pedal and push
the DIRECT SELECT lever up or down, the
parking lock is disengaged and the trans-
mission shifts to neutral N.
If you want to shift from park position P
directly to R or D, depress the brake and
push the DIRECT SELECT lever up or down
past the first point of resistance.
!
If the engine speed is too high, do not shift
the automatic transmission directly from
D to R, from R to D or directly to P. Other-
wise, the automatic transmission could be
damaged.
Engaging park position P automatically
Park position P is automatically engaged if:
R
you switch off the engine using the key and
remove the key, or if you switch off the
engine using the Start/Stop button and
open one of the front doors.
R
HOLD (
Y
page 187) or DISTRONIC PLUS
(
Y
page 174) brake your vehicle until it is
stationary and at least one of the following
conditions is fulfilled:
-
there is a system malfunction.
-
there is a severe uphill or downhill slope.
The electric parking brake is then also
applied.
Engaging reverse gear R
!
Only shift the automatic transmission to
R when the vehicle is stationary.
X
Push the DIRECT SELECT lever up past the
first point of resistance.
146
Automatic transmission
Driv
in
ga
nd
pa
rk
ing