X
Briefly press button
;
repeatedly until the
SET TIME
menu appears in multifunction dis-
play
:
.
Wait until the hour and minutes displays flash.
X
To set the hour: press and hold button
;
for
approximately 4 seconds until just the hour
display flashes.
X
Briefly press button
;
repeatedly until the
desired hour is set.
X
To set the minutes: after approximately 4
seconds, when only the minutes display is
flashing, briefly press button
;
repeatedly
until the desired minutes display is reached.
The time is set after approximately 3 seconds.
Operating the on-board computer
Overview
:
Multifunction display
;
Button for scrolling through the displays
The on-board computer is activated as soon as
you turn the key to position
2 in the ignition lock.
You can use the on-board computer to call up
information about your vehicle.
X
Briefly press button
;
as many times as is
necessary to reach the desired information
display.
Resetting values
X
In multifunction display
:
, use button
;
to
select the appropriate value to be displayed,
e.g. trip meter, fuel consumption, range.
X
Press button
;
as long as is necessary until
the value is reset to zero.
i
If the storage capacity is exceeded, the val-
ues are automatically reset to zero.
i
For vehicles with trip computer, all trip com-
puter values are reset when resetting one trip
Example: standard display
:
Clock
;
Outside temperature
=
Information display, e.g. total distance
recorder
Values and settings as well as display messages
are shown in the multifunction display.
The following may be shown in the multifunction
display:
R
Total distance recorder and trip meter
R
Fuel consumption, range, distance covered,
average speed (
R
R
R
Messages concerning malfunctions (together
with the
¯
R
Warning messages (together with the
¤
warning lamp) (
Display and operation
125
On-board computer and displays
Z
Summary of Contents for Citan 2015
Page 1: ...Citan Operating Instructions ...
Page 212: ...210 ...
Page 213: ...211 ...
Page 214: ...212 ...
