84
Description and roadside assistance
Guidelines for Breakdown Services (Subject to technical modifications)
i
Brake system
Releasing the spring-loaded parking brake mechanically
왘
Remove cotter pin
1
and unscrew nut
2
.
왘
Remove washer
6
.
왘
Pull release bolt
4
out of bracket
5
.
왘
Remove stop plug
3
.
왘
Insert release bolt
4
into hole of spring-loaded cylinder and turn 90° clockwise.
왘
Pull on the release bolt
4
to make sure that the release bolt
4
is firmly seated at the spring stop.
왘
Screw nut
2
with washer
6
onto release bolt
4
.
왘
Release spring in spring-loaded cylinder mechanically by tightening nut
2
in clockwise direction.
왘
Swing lever of parking brake valve to full brake position.
The combination cylinder is vented.
1
Cotter pin
2
Nut
3
Stop plug
4
Release bolt
5
Bracket (for release bolt)
6
Washer
Risk of injury
G
Make sure that the release bolt is firmly seated at the spring stop. Otherwise the release bolt can come loose
when the nut is tightened, and you could be injured.
!
Tighten the nut to no more than 120 Nm otherwise the spring-loaded cylinder will be damaged.