Mercedes-Benz A-Class 2020, Operator'S Manual, Page: 265 / 434

* NOTE Damage due to unsuitable car
wash
#
Before driving into a car wash make
sure that the car wash is suitable for
the vehicle dimensions.
#
Ensure there is sufficient ground clear‐
ance between the underbody and the
guide rails of the car wash.
#
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is sufficient.
To avoid damage to your vehicle when using a
car wash, ensure the following beforehand:
R
Active Distance Assist DISTRONIC and the
HOLD function are deactivated.
R
the 360° Camera or the rear view camera is
switched off.
R
the side windows and sliding sunroof are
completely closed.
R
the blower for the ventilation/heating is
switched off.
R
the windshield wiper switch is in position g .
R
the SmartKey is at a minimum distance of
10 ft (3 m) away from the vehicle, otherwise
the tailgate could open unintentionally.
R
in car washes with a conveyor system: neu‐
tral i is engaged.
% In car washes with a conveyor system: if you
would like to leave the vehicle while it is
being washed, make sure the SmartKey is
located in the vehicle. The park position j
is otherwise automatically engaged.
% If, after the car wash, you remove the wax
from the windshield and wiper rubbers, this
will prevent smearing and reduce wiper
noise.
Activating/deactivating automatic car wash
mode
Requirements:
R
The vehicle is stationary.
R
The engine is running.
Multimedia system:
4
©
5
Settings
5
Quick Access
Activating automatic car wash mode
#
Select Automatic Car Wash Mode .
#
Select Start .
If one of the settings cannot be selected, this is
displayed by a % behind the respective set‐
ting.
% For an overview of the settings made when
activating automatic car wash mode
(
/
page 262).
Deactivating automatic car wash mode
#
Select Stop .
The automatic car wash settings are reset.
% The automatic car wash mode is automati‐
cally deactivated as soon as a speed of
12 mph (20 km/h) is exceeded.
Maintenance and care 263