Controls
I
Combination Switch
1
Low beam (lighting switch
turned clockw ise to 2nd notch)
2 High beam (lighting switch
turned clockw ise to 2nd notch)
3 Headlamp flasher (high beam
available independent of
lighting switch position)
4 Turn signals, right
5 Turn signals, left
18
To operate the turn signals, move
the com bination switch past the
point of resistance (up or down).
The switch is autom atically can
celled when the steering wheel is
turned by a large enough angle.
To signal m inor directional changes
of the vehicle, such as changing
lanes on a highway, move com bi
nation switch to the point of resi
stance only and hold it there.
6 C ontrol for w indshield washer
system
When the washer system is
switched on, the wipers also
operate
7 W indshield w iper control
0 W indshield w iper switched off
1
Interm ittent wiping
II Normal w iper speed
III High w iper speed
Hints:
If one of the turn signals fails,
the turn signal indicator system
flashes and sounds at a faster
sequence than under normal
operating conditions.
Fog lamps w ill only operate
together with low beam headlamps.
Fog lamps are turned off auto
m atically when lighting switch is
returned to off-position.
Summary of Contents for 450 SL 1980
