Mercedes-Benz 300 TD-TURBO DIESEL 1982, Owner'S Manual

Page: 47 / 105

Radio
Direct frequency dialing
In order to select a station with a known frequency, select the wave band, press
the function button □ and then enter the frequency by pressing the
corresponding push buttons.
Example: FM 98.5 MHz AM 1050 KHz
Press any button marked
ED
through
ED
El
through
ED
Press the function button
□ □
Enter frequency by pressing
m m
ED ED ED ED
When dialing a frequency directly, the number of the push buttons is not
displayed on the panel. The wave band is indicated by showing “ MHz" for FM
or "KH z” for AM.
Note:
All AM stations have allocated frequencies ending with a “ 0” .
All FM stations have allocated frequencies ending with an odd
(uneven) digit after the decimal point.
Broadcasters sometimes may not give their exact frequency but the next
closest even number.
US radio frequency ranges: AM 540—1600 KHz
FM 88.1-107.9 MHz
Manual tuning (used to fine tune a
station or for manual scanning)
After selecting the desired AM or FM
wave band, press the function control
button a
Depress and hold the
(left or right side) button. The
frequency will increase or decrease
respectively in increments of 0.1 MHz
for FM or 1.0 KHz for AM. Release the
button when the desired station is
tuned in.
If, after pressing the function con-___
trol O . the station seeker bar I
is not activated within eight seconds,
the manual tuning mode is ended
automatically.
Safety Note
To avoid distraction of attention from
the vehicle’s operation and the road,
it is recommended NOT to perform
any manual tuning operations by the
driver while the vehicle is in motion.
Use the automatic station search
operation or preset stations instead.
Push button tuning
Six FM stations and four AM stations
can be stored in memory and recalled
by pressing the appropriate buttons
marked
ED
through
l
D
for FM
or
El
through
03
for AM stations.
To store stations in memory
Any FM station frequency displayed
on the panel can be stored on any
button marked
ED
through
ED
by
depressing the button desired and
holding it until the display has
changed from the “ old” setting to a
“ blank” and then to the new fre­
quency to be stored.
41
A U T O M A T IC
A U T O M A T IC