see the top view of the vehicle and the image
from the rear view camera.
Selecting the split-screen and full
screen displays
Switching between split screen views:
X
To switch to the line with the vehicle icons:
slide
5
the controller.
X
To select a vehicle icon: turn the controller.
Switching to full screen mode:
X
180° View
Turn and press the controller.
i
The 180° option is only available in the fol-
lowing views:
R
Top view with picture from the rear view
camera
R
Top view with picture from the front camera
Displays in the multimedia system
Important safety notes
The camera system may show a distorted view
of obstacles, show them incorrectly or not at all.
Obstacles are not shown by the system in the
following locations:
R
under the front and rear bumpers
R
very close to the front and rear bumpers
R
in close range above the handle on the trunk
lid
R
very close to the exterior mirrors
R
in the transitional areas between the various
cameras in the virtual top view
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
R
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
Use the guidelines only for orientation.
Approach objects no further than the bottom-
most guideline.
Top view with picture from the rear view
camera
:
Yellow guide line at a distance of approx-
imately 13 ft (4.0 m) from the rear of the
vehicle
;
Symbol for the split screen setting with top
view and rear view camera image
=
Guide line for the maximum steering angle
?
Yellow lane marking tires at current steering
wheel angle (dynamic)
A
Yellow guide line for the vehicle width
including the exterior mirrors, for current
steering wheel angle (dynamic)
B
Vehicle center axle (marker assistance)
C
Yellow guide line at a distance of approx-
imately 3 ft (1.0 m) from the rear of the vehi-
cle
D
Bumper
E
Red guide line at a distance of approximately
12 in (0.30 m) from the rear of the vehicle
The guide lines are shown when the transmis-
sion is in position R.
The distance specifications only apply to
objects that are at ground level.
226
Driving systems
Driving
and
parking