Mercedes-Benz 2013 CLA, Owner'S Manual

Page: 332 / 352

Overview of abbreviations used in the follow-
ing tyre tables:
R
BA: both axles
R
FA: front axle
R
RA: rear axle
You will find a table with recommended tyre
pressures for various operating conditions on
the inside of your vehicle's fuel filler flap. For
further information on tyre pressure, see
(
Y
page 319). Check tyre pressures regularly
and only when the tyres are cold.
Notes on the vehicle equipment – always fit
the vehicle:
R
with tyres of the same size on a given axle
(left/right)
R
with the same type of tyres at a given time
(summer tyres, winter tyres, MOExtended
tyres)
Exception: it is permissible to fit a different
type or make in the event of a flat tyre.
Observe the "MOExtended tyres (tyres with
run-flat characteristics" section
(
Y
page 298).
Vehicles with MOExtended tyres are not
equipped with a TIREFIT kit at the factory. It
is therefore recommended that you addition-
ally equip your vehicle with a TIREFIT kit if you
fit tyres that do not feature run-flat charac-
teristics, e.g. winter tyres. A TIREFIT kit can
be obtained from a qualified specialist work-
shop.
In the following table, the wheel/tyre combi-
nations are allocated to the vehicle models
through variants, e.g. V1, V2 etc.:
V1 CLA 180, CLA 200, CLA 220 CDI
V2 CLA 250
i Not all wheel/tyre combinations can be
fitted at the factory in all countries.
330
Wheel and tyre combinations
Wheels and tyres