Mercedes-Benz 2010 GL 350 BlueTEC, Operator'S Manual

Page: 145 / 380

your safety and the safety of others, we
recommend that you pull over to a safe
location and stop before placing or taking a
telephone call. If you choose to use the
telephone while driving, please use the hands-
free device and only use the telephone when
weather, road and traffic conditions permit.
Some jurisdictions prohibit the driver from
using a mobile phone while driving a vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
You can connect your telephone to the
COMAND system via Bluetooth
®
, see
separate COMAND system operating
instructions.
X
Switch on the COMAND system.
Refer to separate COMAND system
operating instructions.
X
Press button
U
or
V
repeatedly until
the message
TEL
appears in the
multifunction display.
One of the following messages will appear
in the multifunction display:
R
No Service
: No network is available.
R
Bluetooth Ready : The telephone has
not been connected to the COMAND
system via Bluetooth
®
yet.
X
Connect the telephone to the
COMAND system via Bluetooth
®
.
R
Ready
or name of the network provider
(if available): The telephone has found a
network and is ready for use. You can
operate it using the control system.
Answering a call
When your telephone is ready to receive calls,
you can answer a call at any time. In the
multifunction display you will then see the
following message, or if available, the caller
ID (number or name):
X
Press button
6
.
You have answered the call.
Ending a call or rejecting an incoming
call
X
Press button
~
.
Dialing a number from the phone book
When your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
X
Press button
U
or
V
repeatedly until
the message
TEL
appears in the
multifunction display.
X
Press button
&
or
*
repeatedly until
the desired name appears in the
multifunction display.
If you press and hold button
&
or
*
for longer than 1 second, the system
scrolls rapidly through the list of names
until you release the button again.
The stored names are displayed in
alphabetical order.
:
Selected name from the phone book
X
Press button
6
.
The control system dials the selected
phone number.
Control system
143
Controls in detail
X164_AKB; 5; 31, en-US
d2ureepe,
Version: 2.11.8.1
2009-09-11T12:30:16+02:00 - Seite 143
Z