manualshive.com logo in svg

Mercedes-Benz 2008 CL 550 4MATIC, Operator'S Manual

Share
Download
Mercedes-Benz 2008 CL 550 4MATIC Operator'S Manual Download Page 504

More user manuals on 

ManualsBase.com

Vehicle status messages in the multifunction display

502

Display messages

Possible cause/consequence

Possible solution

Currently

Unavailable

See Oper. Manual

The ESP

®

 and the PRE-SAFE

®

 system are

switched off due to undervoltage. It is
possible that the battery is not charged.
The brake system still functions normally.
The BAS Plus and the PRE-SAFE

®

 Brake

are also not available.

X

Continue driving with added caution.

X

Have the system checked at an authorized
Mercedes-Benz Center as soon as possible.

Failure to follow these instructions increases the
risk of an accident.

Currently

Unavailable

See Oper. Manual

If the yellow ESP

®

 warning lamp 

v

flashes while driving and this message
appears, the Electronic Traction System
(ETS/4-ETS) has switched off to prevent
overheating of the drive wheel brakes.
The BAS Plus and the PRE-SAFE

®

 Brake

are also not available.

As soon as the brakes have cooled off, the
Electronic Traction System (ETS/4-ETS)
switches on again.
The message in the multifunction display
disappears and the ESP

®

 warning lamp 

v

goes out.

Tele Aid

Inoperative

One or more main functions of the Tele Aid
system are malfunctioning.

X

Have the Tele Aid system checked at an
authorized Mercedes-Benz Center.

SRS Malfunction

Service Required

There is a malfunction in the supplemental
restraint systems. The air bags or
Emergency Tensioning Devices (ETDs)
could deploy unexpectedly or fail to
activate in an accident.

X

Drive with added caution to the nearest
authorized Mercedes-Benz Center.

Practical hints

Summary of Contents for 2008 CL 550 4MATIC













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands