Stolen vehicle recovery service
If your vehicle has been stolen:
X
Notify the police.
The police will issue a numbered incident
report.
X
This number will be forwarded to the
Mercedes-Benz Customer Assistance Cen-
ter together with your PIN.
The Mercedes-Benz Customer Assistance
Center then tries to locate the system. The
Mercedes-Benz Customer Assistance Cen-
ter contacts you and the local law enforce-
ment agency if the vehicle is located.
However, only the law enforcement agency
is informed of the location of the vehicle.
If the anti-theft alarm system is activated for
longer than 30 seconds, the Mercedes-Benz
Customer Assistance Center is automatically
notified.
Vehicle remote malfunction diagnosis
With the vehicle remote malfunction diagno-
sis, the Customer Assistance Center can pro-
vide improved support for problems with your
vehicle. During an existing call, vehicle data is
transferred to the Customer Assistance Cen-
ter.
The customer service representative can use
the received data to decide what kind of
assistance is required. You are then, for
example, guided to the nearest authorized
Mercedes-Benz Center or a recovery vehicle
is called.
If vehicle data needs to be transferred during
an MB Info call or a Roadside Assistance call,
this is initiated by the Customer Assistance
Center.
You will see the following message in the
COMAND display:
Roadside Assistance
Roadside Assistance
Connected
Connected
. If the remote malfunction diag-
nosis can be started, the
Request for
Request for
Vehicle Diagnostics Received Start
Vehicle Diagnostics Received Start
vehicle
vehicle diagnostics?
diagnostics?
message appears in
the display.
X
Press the
Yes
Yes
button to confirm the mes-
sage.
X
When the
Vehicle Diagnostics
Vehicle Diagnostics
Please Start Ignition
Please Start Ignition
message
appears: turn the SmartKey to position 2 in
the ignition lock (
Y
page 157).
X
If the
Please follow the instruc‐
Please follow the instruc‐
tions received by phone and move
tions received by phone and move
your vehicle to a safe position.
your vehicle to a safe position.
message appears: please follow the
instructions received by phone and move
your vehicle to a safe position.
The message in the display disappears.
The vehicle operating state check begins.
During this procedure, you will see the
Vehicle
Vehicle Diagnostics
Diagnostics Active
Active
message.
If you select
Cancel
Cancel
the vehicle remote
malfunction diagnosis is canceled com-
pletely.
When the check is complete, the
Sending
Sending
vehicle diagnostics data. (Voice
vehicle diagnostics data. (Voice
connection may be interrupted dur‐
connection may be interrupted dur‐
ing
ing data
data transfer)
transfer)
message appears. The
vehicle data can now be sent.
X
Press the
OK
OK
button to confirm the mes-
sage.
The voice connection with the Customer
Assistance Center is terminated.
The
Vehicle Diagnostics: Transfer‐
Vehicle Diagnostics: Transfer‐
ring Data...
ring Data...
message appears.
The vehicle data is sent to the Customer
Assistance Center.
Depending on what the customer service rep-
resentative agreed with you, the voice con-
nection is re-established after the transfer is
complete. If necessary, you will be contacted
at a later time by another means, e.g. by e-
mail or phone.
Another function of the vehicle remote mal-
function diagnosis is the transfer of service
data to the Customer Assistance Center. If a
service is overdue, the COMAND display
shows a message about various special offers
at your workshop.
Features
317
Stowage
and
features
Z
Summary of Contents for 2008 C 300 4MATIC Sport
