Mercedes-Benz 2007 SLR Mclaren Operator'S Manual Download Page 56

Page: 56 / 425

Getting started

Parking and locking

왔

Parking and locking

You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.

Parking brake

Parking brake lever

Warning!

With the engine not running, there is no

power assistance for the brake and steering

system. In this case, it is important to keep

in mind that a considerably higher degree of

effort is necessary to brake and steer the

vehicle.

Warning!

Do not park this vehicle in areas where com-

bustible materials such as grass, hay or

leaves can come into contact with the hot

exhaust system, as these materials could be

ignited and cause a vehicle fire.

To reduce the risk of personal injury or dam-

age to the vehicle drivetrain as a result of ve-

hicle movement, before turning off the

engine and leaving the vehicle always:

앫

Keep right foot on brake pedal.

앫

Pull the parking brake lever up as many
notches as possible.

앫

Move the gear selector lever to park
position

앫

Slowly release brake pedal.

앫

When parked on an incline, turn front
wheels towards the road curb.

앫

Turn the SmartKey in the starter switch
to position

and remove.

앫

Take the SmartKey with you and lock
vehicle when leaving.

Warning!

Engaging the parking brake while the vehicle

is in motion can cause the rear wheels to

lock up. You could lose control of the vehicle

and cause an accident. In addition, the

vehicle’s brake lights do not light up when

the parking brake is engaged.

Summary of Contents for 2007 SLR Mclaren










































































































































































































































































































































































































































Search results

Summary of Contents for 2007 SLR Mclaren

Reviews:

Brands by name

Popular brands

Mercedes-Benz 2007 SLR Mclaren, Operator'S Manual

Search results

Summary of Contents for 2007 SLR Mclaren

Reviews:

Brands by name

Popular brands