Mercedes-Benz 2007 SLR Mclaren, Operator'S Manual

Page: 136 / 425

135
Controls in detail
Control system
Setting daytime running lamp mode
(USA only)
왘
Move the selection marker with button
æ
or
ç
to the Lighting sub-
menu.
왘
Press button
j
or
k
repeatedly
until you see this message in the left
multifunction display:
Light circuit
Headlamp mode .
The selection marker is on the current
setting.
왘
Press button
æ
or
ç
to select
manual operation ( Manual ) or daytime
running lamp mode ( Constant )
activated.
With daytime running lamp mode activated
and the exterior lamp switch in
position
M
or
U
, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
following lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime
running lamp mode, see “Daytime running
lamp mode” (
컄
page 108).
Setting locator lighting
With the locator lighting feature activated
and the exterior lamp switch in
position
U
, the following lamps will
switch on during darkness when the
vehicle is unlocked with the SmartKey:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
앫
Front fog lamps
The locator lighting switches off when the
driver’s door is opened.
If you do not open a door after unlocking
the vehicle with the SmartKey the lamps
will switch off automatically after approxi-
mately 40 seconds.
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
i
If you turn the exterior lamp switch to anoth-
er position, the corresponding lamp(s) will
switch on.
For safety reasons, resetting the
Lighting
sub-
menu to factory settings (
컄
page 129) will not
reset the daytime running lamp mode.
The following message appears in the right multi-
function display:
Cannot be fully reset to
factory settings when driving
.