Mercedes-Benz 2005 CL-Class, Operator'S Manual

Page: 169 / 458

167
Controls in detail
Automatic transmission
1 Current gear range/gear selector lever
position
2 Current program mode
The current gear range/gear selector lever
position and program mode (
C
/
S
)
or (
M
/
C
/
S
) appear in the tachometer
display.
When the gear selector lever is in
position
D , you can influence transmission
shifting by:
앫 limiting the gear range
앫
changing gears manually
Warning!
G
It is dangerous to shift the gear selector
lever out of
P or N if the engine speed is
higher than idle speed. If your foot is not
firmly on the brake pedal, the vehicle could
accelerate quickly forward or reverse. You
could lose control of the vehicle and hit
someone or something. Only shift into gear
when the engine is idling normally and when
your right foot is firmly on the brake pedal.
!
Allow engine to warm up under low
load use. Do not place full load on the
engine until the operating temperature
has been reached.
Shift into reverse gear R or parking
position P only when the vehicle is
stopped.
Avoid spinning of a drive wheel for an
extended period when driving off on
slippery road surfaces. This may cause
serious damage to the drivetrain which
is not covered by the Mercedes-Benz
Limited Warranty.