Mercedes-Benz 2005 CL-Class, Operator'S Manual

Page: 103 / 458

101
Controls in detail
Locking and unlocking
Opening the trunk
Opening the trunk from the outside
A minimum height clearance of 6.3 ft
(1.90 m) is required to open the trunk lid.
The trunk lid lock button is located in the
rear license plate recess.
1 Trunk lid lock
In vehicles without KEYLESS-GO*: The ve-
hicle must be unlocked.
왘
Press trunk lid lock 1 .
The trunk lid opens.
i
If the vehicle has previously been
locked from the outside with the
SmartKey or KEYLESS-GO*, opening a
door from the inside will trigger the an-
ti-theft alarm system.
To cancel the alarm, do one of the fol-
lowing:
앫
Insert the SmartKey in the starter
switch.
앫
Press button
Œ
or
‹
on the
SmartKey.
In vehicles with KEYLESS-GO*:
앫
Grasp the outside door handle.
The SmartKey with KEYLESS-GO
must be within 3 ft. (1 m) of the ve-
hicle.
앫
Press the KEYLESS-GO* start/stop
button (
컄
page 35).
The SmartKey with KEYLESS-GO
must be inside the vehicle.
!
The trunk lid swings open upwards au-
tomatically. Always make sure that
there is sufficient overhead clearance.
Vehicles with trunk lid opening/closing
system*: To stop the opening proce-
dure, press button
Š
on the
SmartKey or SmartKey with
KEYLESS-GO*.
i
The trunk can also be opened using
button
Š
on the SmartKey or
SmartKey with KEYLESS-GO* or from
its inside in an emergency, see “Trunk
lid emergency release” (
컄 page 109).