Mercedes-Benz 2004 C-Class Coupe, Operator'S Manual

Page: 238 / 376

238
Operation
Engine compartment
Checking engine oil level with the
control system
When checking the oil level the vehicle
must
앫
be parked on level ground
앫
be at normal operating temperature
앫
have been stationary for at least five
minutes with the engine turned off
To check the engine oil level via the
multifunction display, do the following:
왘
Turn the SmartKey in the starter switch
to position
2 .
The standard display (
컄
page 109) should
appear in the multifunction display.
왘
Press button
k
or
j
on the
steering wheel until the following
message is seen in the multifunction
display:
ENGINE OIL LEVEL
MEASURING NOW
MEASURE. CORRECT
ONLY IF VEH. LEVEL
One of the following messages will
subsequently appear in the indicator:
앫
ENGINE OIL LEVEL
OK
앫
ADD 1.0 Qt. TO
REACH MAX. OIL LEVEL!
(Canada: 1.0 LITER )
앫
ADD 1.5 Qts. TO
REACH MAX. OIL LEVEL!
(Canada: 1.5 LITERS )
앫
ADD 2.0 Qts. TO
REACH MAX. OIL LEVEL!
(Canada: 2.0 LITERS )
왘
If necessary, add engine oil.
For adding engine oil, see (
컄
page 239).
For more information on engine oil, see
“Technical data” section (
컄
page 330).
Other display messages
If the SmartKey is not turned to position 2
in the starter switch, the following
message will appear:
FOR ENGINE OIL LEVEL
SWITCH ON IGNITION!
왘
Switch on the ignition.
i
If you want to interrupt the checking
procedure, press the
k
or
j
button on the multifunction steering
wheel.