Mercedes-Benz 2004 C-Class Coupe, Operator'S Manual

Page: 126 / 376

126
Controls in detail
Control system
With daytime running lamp mode se-
lected and the exterior lamp switch at
position
0 , the following lamps will
come on automatically when the
engine is turned on:
앫
Parking lamps and low beam head-
lamps
앫
License plate lamps in low ambient
light conditions
Setting locator lighting
During darkness, the following lamps will
come on when the exterior lamp switch is
in position
U
, the locator lighting fea-
ture is activated, and the vehicle is un-
locked by SmartKey:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Front fog lamps
To activate locator lighting:
왘
Make sure the function
LOCATOR
LIGHTING
is set.
왘
Turn the exterior lamp switch to posi-
tion
U
.
The locator lighting switches off when the
driver’s door is opened. It switches off au-
tomatically after a period of approximately
40 seconds.
왘
Move the selection marker with
the
æ
or
ç
button to the LIGHT-
ING submenu.
왘
Press button
j
or
k
repeatedly
until you see this message in the dis-
play:
LOCATOR LIGHTING
.
The selection marker is on the current
setting.
왘 Press
æ
or
ç
to select the de-
sired setting.
The locator lighting will be switched on
or off.
i
If you turn the exterior lamp switch to
another position, the corresponding
lamp(s) will switch on.
For safety reasons, resetting the
LIGHTING submenu to factory settings
(
컄
page 120) while driving will not re-
set the daytime running lamp mode.
In the display you will then see the mes-
sage:
LIGHTING – CANNOT BE TOTALLY
RESET TO FACTORY SETTINGS WHILE
DRIVING
.
컄컄