Mercedes-Benz 2000 SLK-Class Operator'S Manual Download Page 30

Page: 30 / 273

Central locking system

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

Panic button

To activate press and hold button (1) for at least one
second. An audible alarm and blinking exterior lamps
will operate for approximately 3 minutes.

To deactivate press button (1) again, or turn key in
steering lock to position 2.

Note:

For operation in the USA only: This device complies
with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received,
including interference that may cause undesired
operation.

Any unauthorized modification to this device could void
to the user’s authority to operate the equipment.

Summary of Contents for 2000 SLK-Class











































































































































































































































































Search results

Summary of Contents for 2000 SLK-Class

Reviews:

Related manuals for 2000 SLK-Class

Brands by name

Popular brands

Mercedes-Benz 2000 SLK-Class, Operator'S Manual

Search results

Summary of Contents for 2000 SLK-Class

Reviews:

Related manuals for 2000 SLK-Class

Brands by name

Popular brands