Mercedes-Benz 2000 SLK-Class Operator'S Manual Download Page 14

Page: 14 / 273

Introduction

Where to find it

The Operator’s Manual is divided into eight sections:

• Instruments and controls:

An overview of all the controls that can be operated from the driver’s seat.

• Operation:

Information on the vehicle’s equipment and its operation.

• Driving:

Important information on driving.

• Instrument cluster display:

Indicator lamps on the instrument cluster with brief instructions.

• Practical hints:

Assistance and instructions in the event of an emergency.

• Car care:

Instructions on caring for your vehicle.

• Technical data:

All the important technical data for your vehicle as well as consumer information such as fuels,

coolants, lubricants etc. is contained here.

• Index :

Key terms to help you find a topic quickly.

Other documents may also be supplied, depending on your vehicle’s equipment.

Explanation of color used:

Warning notices for the protection of yourself and
others appear on red background.

Summary of Contents for 2000 SLK-Class











































































































































































































































































Search results

Summary of Contents for 2000 SLK-Class

Reviews:

Related manuals for 2000 SLK-Class

Brands by name

Popular brands

Mercedes-Benz 2000 SLK-Class, Operator'S Manual

Search results

Summary of Contents for 2000 SLK-Class

Reviews:

Related manuals for 2000 SLK-Class

Brands by name

Popular brands