Volume adjustment
To reduce volume, press the volume
control button
downward;
to increase volume, press the button
upward.
A fader control, located in the center
console, allows for balancing the vol
ume level between the front and rear
speakers.
The left to right stereo balance may be
adjusted by firs^re ssin g the function
control button H | and ttien pressing
the bass c o n tro T C u tto n K I or the
treble control button J ^ T h i s will
cause the stereo balance to shift
either left or right respectively.
To center the left to right stereo bal-
ance, briefly press both buttons
and m
simultaneously.
The stereo balance setting will be dis
played (as shown below) when the
balance feature is activated. The mag
nitude of the setting is shown by a
number from 0 to 8. Bracketing this
number are two arrows indicating the
direction of the setting. For example:
< 0 > = null or centered balance
< 5
= balance shifted 5 units left
7 > = balance shifted 7 units right.
Speed-Dependent Volume Adjustment
The radio includes a special function that adjusts radio volume in respect to
vehicle speed.
To adjust the tone characteristic
Bass
and treble Q
can be adjusted independently.
To set the radio to a “flat” tone setting (bass and treble at mid-range setting),
briefly press both tone control buttons
and
simultaneously. The tone
setting indicators display the selected rnicTrange setting:
p
_
j - = = Mid-range Setting
Upon pressing either tone control button (either Q | or
), the bass or treble
will increase until the respective tone control button is released or when the ma
ximum tone level is reached.
p =
j - = = Maximum Treble
p
_
j - = = Maximum Bass
After reaching the maximum tone level, the tone setting will stay at that level
unless the tone control button is released and pressed again, at which point the
tone level will begin decreasing. It will stop decreasing when the tone control
button is released or when the minimum tone level is reached.
p
j - = = Minimum Treble
p
_
- j= =
Minimum Bass
After reaching the minimum tone level, the tone setting will stay at that level un
less the tone control button is released and pressed again. After pressing the
tone control button again the tone level will begin to increase and the cycle is re
peated.
Summary of Contents for 190 E 2.6 1989
